plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Sliding Door - Will Not Unlatch|Page 6981 > < Sliding Door - Will Not Unlatch|Page 6979
Page 2
background image

1.

Replace the rear door lock holder with P/N MU481239 and rear door locking snap with P/N MU481259 (Figure 1).

2.

Operate the sliding door to determine if the unlatching effort is excessively high.

3.

If the unlatching effort is high, adjust the center pillar side striker in an outward direction. An adjusting shim P/N MB574974 may be needed to
reduce the interference and operational force of the latch (Figure 1).

4.

Confirm the proper operation of the door handles and lock system. Reinstall the watershield and upper trim panel.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:Replace Rear Door Locking Snap and Holder
Labor Operation No: 23-41-09-91

0.4 Hrs.

Replace Rear Door Locking Snap. Holder, and Adjust Striker
(includes shim)
23-41-09-92

0.5 Hrs.

FAILURE CODE: P8 - New Part

Technical Service Bulletin # 234695

Date: 950728

Sliding Door - Will Not Unlatch

NO: 23-46-95

GROUP: Body

DATE: Jul. 28, 1995

SUBJECT:

Sliding Door - Will Not Unlatch|Page 6981 > < Sliding Door - Will Not Unlatch|Page 6979