Colt Vista FWD L4-1795cc 1.8L SOHC (1994)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor
CAUTION: Be careful not to touch the tool against the resin section of the connector when removing and installing.
REMOVAL
1. Disconnect electrical connector from sensor.
2. Remove sensor from the intake manifold.
INSTALLATION
1. Apply sealant to threaded portion.
Specified sealant: 3M NUT locking Part No. 4171 or equivalent
2. Install engine coolant temperature sensor and tighten it to specified torque.
Sensor tightening torque: 30 Nm (22 ft lb)
3. Fasten harness connectors securely.
