Colt Vista FWD L4-1795cc 1.8L SOHC (1994)
Upper Valve Body
1. Install valves, springs and plugs shown in the valve body.
2. Then install front end plate or front end cover and tighten seven screws to specified torque.
Shift Valves
3. Insert 2-3 shift plug and 1-2 shift valve into valve body, then install rear end cover by tightening four screws to specified torque.
Upper Valve Body
4. Insert two regulator plugs into valve body.
5. Insert manual valve into valve body.
6. Insert kickdown spring, throttle valve, throttle spring and kickdown valve into valve body.
