Colt Wagon 2WD L4-1468cc 1.5L SOHC (1990)
Vehicle Speed Sensor: Testing and Inspection
1.
The Vehicle Speed Sensor (VSS) is mounted on the rear of the instrument panel. Refer to COMPONENT REPLACEMENT AND REPAIR
PROCEDURES/VSS for procedures in removing the instrument panel.
Testing The Vehicle Speed Sensor
2.
Connect an ohmmeter to terminals # 1 and # 2, as shown.
3.
Check for continuity/no-continuity as the speedometer cable shaft is rotated.
For each rotation continuity/no-continuity should be indicated 4 times.