Colt Wagon 2WD L4-1468cc 1.5L SOHC (1990)
Throttle Body: Service and Repair
Throttle Body Replacement
Throttle Body And Components
REMOVAL
1.
Remove the air intake hose.
2.
Remove the accelerator cable.
3.
Remove the cruise control cable if equipped.
4.
Remove the four bolts securing the throttle body to the intake air plenum and remove the throttle body.
INSTALLATION
1.
Install a new gasket.
2.
Install the throttle body and torque the bolts, in a cross-pattern, to 11-16 lb-ft 15-22 Nm).
3.
Reconnect the throttle cable (and cruise control cable, if equipped).
4.
Reconnect the intake air duct.
5.
Perform idle speed and Throttle Position Sensor adjustments.
