Colt Wagon 2WD L4-1468cc 1.5L SOHC (1990)
Radiator Fan Relay: Testing and Inspection
Fig. 44 Testing Relay Terminal
On Colt models, the fan relay is located in the relay box, in engine compartment.
1.
Remove relay from relay box, apply battery positive to terminal No. 2 and battery negative to terminal No. 1 to relay side of connector.
2.
With battery power supplied connect a suitable ohmmeter between terminals 3 and 4, continuity should exist.
3.
Remove battery voltage from relay, check between terminals 3 and 4 continuity should not exist, then check between terminals 1 and 2, continuity
should exist.