Conquest L4-2555cc 2.6L SOHC Turbo (1984)
License Plate Bracket: Technical Service Bulletins
Front License Plate Bracket - Installation
Models
1984 Colt Vista & 1984 Conquest
Subject
Front License Plate Bracket Installation
Index
BODY
Date
November 21, 1983
No...
23-20-83
P-4499-C
The following procedures cover the dealer installation of the front license plate bracket on subject vehicles. A kit which contains the bracket bolts and
plastic nuts is included with each car.
FIGURE 1
INSTALLING 1984 VISTA FRONT LICENSE PLATE BRACKET MB325956 (FIGURE 1)
1.
Position license plate bracket in the upward position and align the three mounting holes with the bumper holes located in the underside rear
horizontal surface of the front bumper.
2.
Install and securely tighten the three mounting bolts MS200311.
3.
Install the two plastic license plate mounting nuts MA165401 into the square holes at the top of the license plate bracket.
