Conquest L4-2555cc 2.6L SOHC Turbo (1984)
FIGURE 9 - Cartridge Assembly
B.
Apply a thin coat of clean engine oil to the surface of the O-ring installed on the cartridge assembly (Figure 9). Install the turbine assembly in the
compressor cover, lining up the index mark from Step 3 to the oil supply hole on new turbine assembly. Use firm pressure to seat the O-ring in the
compressor cover.
FIGURE 7 - Compressor Housing and Turbine Cartridge
Install the compressor cover snap ring with the beveled side up (Figure 7).