Conquest L4-2555cc 2.6L SOHC Turbo (1984)
FIGURE 3
8.
Reinstall the ECI unit along with the newly attached wiring harness. Make sure the new harness is correctly routed and secured (Figure 3).
9.
Attach modulator, PN MD099402 or MD104805 for 1985-1/2, to bracket, PN MD099403, using the four screws, PN MF243622.
10.
Connect the modulator to fhe newly installed wiring harness.
11.
Attach modulator and bracket assembly, along with the glove box striker, to the instrument panel.
12.
Reinstall glove box.
13.
Reconnect in-car sensor on the under-cover to vehicle wiring harness and reinstall under-cover onto instrument panel.
14.
Reconnect negative battery cable.
15.
Start engine and road test vehicle to insure the sag and/or surge has been eliminated.
