Gran Fury L6-225 3.7L VIN J 1-bbl (1983)
1 - Vacuum Delay valve
PN 4173433
2 - Hose Connectors
PN 3870264
1 - Hose Routing Label
PN 4179816
Must be ordered separately:
1 - Authorized Modification Label
PN 4275086
Installation Procedure
1.
Cut out a 4 inch section from the EGR vacuum hose 12 inches from the EGR valve end of hose.
2.
Cut two 1-1/2 inch sections of 3/16 inch Vacuum Hose PN 3780507 (serviced in 50 foot rolls).
3.
Install the 1-1/2 inch sections of 3/16 inch hose on the Vacuum Delay Valve PN 4173433 supplied in package.
4.
Install the Hose Connectors PN 3870264 supplied, in the ends of the delay valve-hose assembly.
FIGURE 1
5.
Install the delay valve assembly in place of the vacuum hose section removed from the EGR valve vacuum line in Step
1.
Be sure the orange end of the delay valve is oriented toward the EGR valve (see Figure 1).
FIGURE 2