Gran Fury L6-225 3.7L VIN J 1-bbl (1983)
Steering Gear: Service and Repair
Power Steering Gear Service
Overhaul Notes
Prior to disassembly, clean the gear assembly thoroughly in a suitable solvent. Crocus cloth may be used to remove small nicks and burrs provided it is
used carefully. When used on the steering gear valve, use extreme care not to round off the sharp edge portions of the two lands located between the
valve drilled holes. Remove and discard all O-ring seals, using new ones lubricated with fluid when reassembling.
Disassembly
Fig. 1 Removing or installing valve body assembly
Fig. 2 Removing valve lever
Fig. 3 Removing or installing gear shaft cover nut