Gran Fury V8-318 5.2L VIN K 2-bbl (1982)
Low Pressure Sensor / Switch: Service and Repair
Low Pressure Cycling Clutch Switch Replacement
Fig. 6 Cycling clutch switch and low pressure cut-off switch
1. Disconnect switch wiring.
2. Remove switch retaining screws, wrap a rag around capillary tube at well opening and pull tube out of well while holding rag firmly around tube
so that grease stays in well. Do not bend capillary tube. For proper A/C operation, grease must be retained in well.
3. Reverse procedure to install. Check operation.
