Grand Fury/Salon V8-318 5.2L VIN P 2-bbl (1984)
Figure 3 - WIRING CONNECTORAS VIEWED FROM SENSOR HALF - TERMINAL END
9.
Route throttle position sensor wiring in convolute along existing convolute and the wrap together with PN 6015756. Reinstall all the wires into
their correct position in the previously cleaned connector (Figure 3).
10.
Fill the 6-way connector with the silicone grease supplied with the new sensor.
11.
Reconnect the throttle body 6-way connector.
12.
Start engine, place transmission in neutral, apply park brake, and open throttle several times to wide open throttle position. Power loss/limit light
should be off. If lamp comes back on, repeat Driveability Test Procedure.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Refer to the Labor Operation Time Schedule for appropriate labor operation number and failure code.
