Grand Fury/Salon V8-318 5.2L VIN P 2-bbl (1984)
end of shaft. Using a file, clean burrs from around pin hole in shaft and remove lower thrust washer, then push shaft up and remove through
top of distributor body.
ASSEMBLY
1.
Lubricate and install upper thrust washer(s) on shaft and slide shaft into distributor body.
2.
Install distributor shaft retainer and pin, Figs. 4 and 5.
3.
Install plate and pickup coil assembly and retaining screws.
4.
Position reluctor keeper pin into position on reluctor sleeve.
5.
Slide reluctor down reluctor sleeve and press firmly into place, then install keeper pin.
