Grand Fury/Salon V8-318 5.2L VIN P 2-bbl (1984)
Fig. 3 Installing shift lever grommets
Fig. 4 Ground clip & capsule installation
INSTALLATION
1. With plastic capsules pre-assembled in bracket slots, install ground clip on left capsule slot. Install column through floor pan opening using care to
avoid damaging paint or trim.
2. With front wheels in a straight ahead position and master splines on wormshaft and coupling aligned, engage coupling with wormshaft and install
roll pin. Do not apply end loads to steering shaft.
3. While holding column assembly with bracket slots on mounting studs, install but do not tighten the two upper bracket washers and nuts.