Grand Fury/Salon V8-318 5.2L VIN R (1985)
Fig. 4 Axle shaft `C' lock installation
TYPES 2 & 3
1. With wheel and brake drum removed, or caliper and rotor assembly removed, loosen differential housing cover and drain lubricant. Remove cover.
2. Turn differential case to make pinion shaft lock screw accessible and remove lock screw and shaft.
3. Push axle shaft inward toward center of car and remove "C" washer from groove in axle shaft.
4. Remove axle shaft from housing, being careful not to damage the axle bearing, which will remain in the housing.
5. The axle bearing and/or seal can now be removed if necessary.
6. Reverse procedure to install.