Grand Voyager L4-2.4L DOHC (1996)
Seat Memory Switch: Description and Operation
CIRCUIT OPERATION
The memory set switch is used for programming the desired seat/mirror positions into the control modules memory. There are three switches used,
a set switch, memory 1, and memory 2. Power for the switches is supplied from the control module to the switches. Ground for the switches is
supplied on circuit Z1 and terminates at the instrument panel left side cowl.
Circuit P22 is used for the SET switch. Circuit P23 is used for the memory switch 1, and circuit P24 is used for the memory switch 2.
