plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Heater-A/C Housing Removal and Installation|Page 8680 > < A/C Suction Line - Moan/Whine Noise|Page 8675
Page 1
background image

Housing Assembly HVAC: Service and Repair
Heater-A/C Housing Removal and Installation

REMOVAL

WARNING:  If equipped with air conditioning, the refrigeration system must be completely empty before proceeding.

1. Set parking brake.
2. Disconnect battery negative cable.

Valve Service Ports

3. Using a refrigerant recovery machine, remove refrigerant from the A/C system.  Refer to: "Testing and Inspection"  See: Testing and Inspection
4. Remove the wiper arms.
5. Remove the cowl cover.
6. Release the hood latch and open hood.

Wiper Unit Wire Connector

7. Disconnect the positive lock on the wiper unit wire connector.
8. Disconnect the wiper unit wire connector from the engine compartment wire harness.
9. Disconnect the windshield washer hose from coupling inside unit.

10. Disconnect the drain tubes from nipples on bottom of the wiper unit.
11. Remove nuts holding wiper unit to lower windshield fence.

Heater-A/C Housing Removal and Installation|Page 8680 > < A/C Suction Line - Moan/Whine Noise|Page 8675