Grand Voyager L4-2.4L DOHC (1996)
Brake Switch (Cruise Control): Testing and Inspection
1. Remove stop lamp switch, then inspect for continuity between terminal No. 5 and No. 6 with plunger released. Continuity Should exist.
2. Inspect for continuity between terminal No. 1 and No. 2 with plunger depressed. Continuity Should exist.
3. Inspect for continuity between terminal No. 3 and No. 4 with plunger depressed. Continuity Should exist.
4. If continuity is not as specified, then stop lamp switch is out of adjustment or defective.