Grand Voyager L4-2.4L DOHC (1996)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Location
The camshaft position sensor is mounted to the rear of the cylinder head.
REMOVAL
1. Disconnect the filtered air tube from the throttle body and air cleaner housing. Disconnect the air tube from the oil separator hose. Remove filtered
air tube.
2. Remove the air cleaner inlet tube.
3. Disconnect engine harness connector from camshaft position sensor.
4. Remove camshaft position sensor mounting screws. Remove sensor.
Target Magnet
5. Loosen screw attaching target magnet to rear of camshaft.
INSTALLATION
