Grand Voyager V6-181 3.0L SOHC (1988)
Wheel Hub: Service and Repair
Replaceable Bearings
REMOVAL
Fig. 14 Hub removal
Fig. 12 Removing bearing from knuckle
1. Remove steering knuckle as previously described.
2. Remove hub using tool No. C-4811-14 or equivalent.
3. Remove four bearing retainer to knuckle attaching screws, then the bearing retainer.
4. Pry bearing seal from machined recess in knuckle assembly.
5. Remove bearing from knuckle using tool No. C-4811-2 or equivalent.
INSTALLATION
Fig. 13 Installing bearing into knuckle