Grand Voyager V6-201 3.3L (1991)
NOTE: The secondary shoe return spring overlaps the primary shoe return spring.
3. Slide the eye of automatic adjuster cable off anchor and then unhook from adjusting lever.
4. Remove cable, overload spring, cable guide and anchor plate.
5. Disengage adjusting lever from spring by sliding forward to clear pivot, then working out from under spring.
6. Remove spring from pivot.
7. Remove shoe to shoe spring from secondary shoe web and disengage form primary shoe web.
8. Remove spring.
9. Disengage primary and secondary shoes and remove adjusting star wheel assembly from shoes.
Fig 3 Removing And Installing Shoe Retainers, Springs And Nails
10. Remove brake shoe retainers, springs and nails using Tool C-4070 or equivalent and remove from support.
11. Remove parking brake lever from secondary shoe.
12. Remove shoes.
13. Disengage parking brake lever from the parking brake cable.
Installation
For additional information see Notes, Warnings, and Hints.
Fig 1 Rear Wheel Brake