Grand Voyager V6-201 3.3L (1991)
Front Door Window Motor: Service and Repair
Front Door Power Regulator
REMOVAL
1.
Remove trim panel and door liner. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
2.
Remove the front door glass. See: Window Glass/Front Door Window Glass/Service and Repair
3.
Disconnect the negative battery terminal.
4.
Remove the power window regulator assembly. See: Window Regulator/Service and Repair/Power Window Regulator Replacement
5.
Remove the two (2) screws mounting the power window lift motor to the window regulator.
6.
Separate the power window lift motor from the regulator.
INSTALLATION
1.
Position the power window lift motor onto the power window regulator and install the mounting bolts.
2.
Install the power window regulator assembly. See: Window Regulator/Service and Repair/Power Window Regulator Replacement
3.
Install the front door glass. See: Window Glass/Front Door Window Glass/Service and Repair
4.
Install the door liner and door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
5.
Connect the negative battery terminal.