Grand Voyager V6-201 3.3L VIN R SMFI (1997)
Lock Cylinder Switch: Service and Repair
Door Lock Cylinder Switch
REMOVAL
1. Remove the door trim and water shield.
2. Close the door window.
3. Disconnect the door lock cylinder switch wire connector from the door harness and wiring clip from the impact beam.
4. Remove the outer handle from the door.
Door Lock Cylinder Switch
5. Disengage the lock tab holding switch to the back of the lock cylinder.
6. Remove the switch from the door handle.
INSTALLATION
1. Install the switch from the door handle.
Door Lock Cylinder Switch
2. Engage the lock tab holding switch to the back of the lock cylinder.
3. Install the outer handle from the door.
4. Connect the door lock cylinder switch wire connector from the door harness and wiring clip from the impact beam.
5. Open the door window.
6. Install the door trim and water shield.
