plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Parking Brake Actuator Lever - Rattles|Page 6512 > < Wheel Cylinder Removal and Installation|Page 6502
Page 1
background image

Parking Brake Actuator: Customer Interest
Parking Brake Actuator Lever - Rattles

NO: 05-05-97

GROUP: Brakes

DATE: Mar. 28, 1997

SUBJECT: 
Parking Brake Actuator Lever Rattle 
(All Wheel Drive)

MODELS:

1997 (NS) Town & Country/Caravan/Voyager
1997 (GS) Chrysler Voyager (International Market)

NOTE

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH ALL WHEEL DRIVE (AWD) BUILT PRIOR TO JAN. 31, 1997 (MDH
0131XX).

SYMPTOM/CONDITION:

Some vehicles may experience a rattle in the area of the rear wheels caused by the parking brake actuator lever(s).

DIAGNOSIS:

Rapidly move the parking brake actuator lever in an up and down motion. If the lever produces a rattle noise, perform the Repair Procedure.

PARTS REQUIRED: 

1

05003157AA

Kit, Isolator

REPAIR PROCEDURE:

This bulletin involves installing a foam isolator on each parking brake actuator lever.

1.

Raise the vehicle on an appropriate hoist.

2.

Remove both rear wheel/tire assemblies.

3.

Remove the disc brake caliper to adapter guide pin bolts (Figure 1).

4.

Remove the rear caliper from the adapter using the following procedure:

A.

Rotate the rear of the caliper up from the adapter.

Parking Brake Actuator Lever - Rattles|Page 6512 > < Wheel Cylinder Removal and Installation|Page 6502