Grand Voyager V6-201 3.3L VIN R SMFI (1997)
Removing/Installing Caliper
10. Remove rear caliper from adapter using the following procedure. First rotate rear of caliper up from the adapter. Then pull the front of the caliper
and the outboard brake shoe anti-rattle clip out from under the front abutment on the adapter.
Correctly Supported Caliper
11. Support caliper to prevent the weight of the caliper from damaging the flexible brake hose.
12. Remove the rotor from the hub/bearing.
Park Brake Cable Attachment To Actuator
13. Remove the horseshoe clip from the retainer on the end of the parking brake cable.
14. Remove the end of the parking brake cable from the actuator lever on the adapter.