Grand Voyager V6-201 3.3L VIN R SMFI (1997)
24.
Install the Direct Ignition System (DIS) coils. Torque fasteners to 12 Nm (105 inch lbs.).
25.
Lubricate the end of the chassis fuel tube with 30 WT oil. Connect fuel supply hose to chassis fuel tube assembly. Pull back on the quick connect
fitting to ensure complete insertion.
26.
Install throttle cable.
27.
Connect fuel injector wiring harness.
28.
Install air cleaner and hose assembly.
29.
Connect negative battery cable.
30.
With the Diagnostic Readout Box (DRB) Scan Tool use Auto Shutdown (ASD) Fuel System Test to pressurize system to check for leaks.
CAUTION: When using the ASD Fuel System Test, The ASD Relay will remain energized for 7 minutes or until the ignition switch is turned to
the OFF position, or Stop All Test is selected.
