Grand Voyager V6-201 3.3L VIN R SMFI (1997)
One (1), four (4) or five (5) wheels are required for each vehicle. The VIN list provided to each involved dealer includes a part code which identifies the
wheel size and number of wheels required for each VIN. This code is located in the third column of the VIN list and is identified by the "P" column
header. Use the table above to identify the correct wheel size and number of wheels required for the vehicle being serviced.
In addition, a valve stem, PN 2073355, must be ordered for each wheel.
Owner Notification and Service Scheduling
All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for the service with their dealers. A copy of the owner notification letter is included.
Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer
reference as needed.
Service Procedure
NOTE:
Affected vehicles may be equipped with 1, 4 or 5 scored wheels (Figure 1). Refer to the Parts Section for further information on the size and number
of wheels required for the vehicle being serviced.
1.
Remove the full size spare from its storage location (if equipped).
CAUTION:
DO NOT use an air impact tool on winch mechanism as this may damage winch.
2.
Raise the vehicle on an appropriate hoist and remove all four stamped steel wheels (if equipped).
