Grand Voyager V6-201 3.3L VIN R SMFI (1997)
8. Disconnect wire connectors from ACM.
9. Remove bolts holding the ACM bracket assembly to floor.
10. Remove the ACM from vehicle.
INSTALLATION
CAUTION: Use correct screws
For installation, reverse the above procedures. Attach the ACM bracket assembly to vehicle with the proper screws and tighten to 10.8 to 16.4
N.m (95 to 145 in. lbs.) torque. Do not connect battery negative cable. Refer to Testing and Inspection/Procedures for Airbag System Test
procedures.
