Grand Voyager V6-201 3.3L VIN R SMFI (1997)
Hood Sensor/Switch (For Alarm): Service and Repair
REMOVAL
1. Release the hood latch and open the hood.
2. Using a small flat blade screws driver, try trigger switch from top of the radiator closure panel.
Hood Ajar Switch
3. Disconnect the trigger switch from the wire connector and remove the switch.
INSTALLATION
Hood Ajar Switch
1. Connect the trigger switch from the wire connector and remove the switch.
2. Using a small flat blade screws driver, try trigger switch from top of the radiator closure panel.
3. Release the hood latch and open the hood.
