Grand Voyager V6-201 3.3L VIN R SMFI (1997)
Fuel Gauge Sender: Service and Repair
Fig 21 Fuel Pump/Level Sensor Electrical Connector
NOTE: Remove fuel pump module to access fuel gauge sender. Refer to Fuel Pump Module.
REMOVAL
1. Depress retaining tab and remove the fuel pump/level sensor connector from the bottom of the fuel pump module electrical connector.
Fig 22 Wire Terminal Locking Wedge
2. Pull off blue locking wedge.
Fig 23 Wire Terminal Locking Finger
3. Using a small screwdriver lift locking finger away from terminal and push terminal out of connector.