plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

A/T - Burned Fluid/Internal Damage|Page 5344 > < A/T - Burned Fluid/Internal Damage|Page 5338
Page 1
background image

Technical Service Bulletin # 21-08-97

Date: 970613

A/T - Burned Fluid/Internal Damage

NO: 21-08-97

GROUP: Transmission

EFFECTIVE DATE: June 13, 1997

SUBJECT: 
Transmission Fluid Auxiliary Cooler

MODELS:
1996 - 1997 (NS)

Town & Country/Caravan/Voyager

1996 - 1997 (GS)

Chrysler Voyager (International Market)

NOTE: 

THIS BULLETIN APPLIES TO ALL VEHICLES EQUIPPED WITH A 6 CYLINDER ENGINE AND 41TE TRANSAXLE.

SYMPTOM/CONDITION:

Transmission fluid has a burnt smell, internal transmission components show signs of high temperature operation.

Some NS-vehicles may be subject to operating conditions that result in extended high transmission fluid temperatures, such as heavy vehicle loading,
trailer towing, extended stop and go driving during high ambient temperatures, etc. Vehicles that are used for trailer towing must be equipped with a
transmission fluid auxiliary cooler.

DIAGNOSIS:

If the transmission is being repaired or replaced and the internal components show signs of high temperature operation (transmission fluid burnt smell,
hardened seals, etc.), perform the Repair Procedure.

PARTS REQUIRED:

1

05003119AA

Kit, Transmission Fluid Auxiliary Cooler

AR (1)

04682455

Hose, Lower Transmission Fluid, Required 
with Trailer Tow (Sales code AHT)

AR (2)

06032839

Clamp, Lower Transmission Fluid Hose, 
Required with Trailer Tow (Sales code AHT)

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No:

21-25-20-98

2.4 Hrs.

FAILURE CODE: P8 - New Part

Repair Procedure

This bulletin involves installing a transmission fluid auxiliary cooler.

NOTE: 

ONLY INSTALL THE TRANSMISSION FLUID AUXILIARY COOLER AFTER THE EXISTING TRANSMISSION OIL COOLER AND
TRANSMISSION HAVE BEEN THROUGHLY FLUSHED.

1.

Release the hood latch and open the hood.

2.

Recover the A/C system refrigerant.

3.

Remove the bolts (one per side) attaching the fascia to the headlamp mounting panel at each side of the grille.

4.

Raise the vehicle on an appropriate hoist.

5.

Remove the front tire/wheel assemblies.

A/T - Burned Fluid/Internal Damage|Page 5344 > < A/T - Burned Fluid/Internal Damage|Page 5338