Grand Voyager V6-229 3.8L (1996)
1.
Open the sliding door and determine the location where the overslam bumper will be installed on the sliding door. Refer to the illustration.
2.
Clean the surface of the sliding door where the overslam bumper will be installed with isopropyl alcohol or similar cleaner.
3.
Peel off the backing from the overslam bumper and stick it on the sliding door.
4.
Touch-up any paint chips on the sliding door and adjacent area of the "B"-post as necessary.
5.
Repeat steps 1 through 4 for the other sliding door if equipped.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-41-43-91 ....................................................................................................................................................................... 0.2 Hrs.
One Or Two Doors
23-41-43-92 ....................................................................................................................................................................... 0.3 Hrs.
Two Doors
FAILURE CODE:
P8 - New Part
Technical Service Bulletin # 237695
Date: 951222
Sliding Door - Paint Chipping
NO: 23-76-95
GROUP: Body
DATE: Dec. 22, 1995
SUBJECT:
Paint Chipping At The Upper Front Corner Of The Sliding Door(s)
MODELS:
1996 (NS) Town & Country/Caravan/Voyager
1996 (GS) Chrysler Voyager (European Market)
NOTE:
