Grand Voyager V6-229 3.8L (1996)
Evaporator Cover
4. Remove evaporator cover.
Rear Expansion Valve / Rear Mode Door / Rear Evaporator
5. Remove the nut that mounts the refrigerant plumbing block to the expansion valve.
Evaporator Removal
6. Carefully pull the evaporator and expansion valve straight out of unit. Do not scratch the sealing surfaces with the plumbing extension tube pilots.
7. Remove and discard the 0-rings between the plumbing extension and the expansion valve.
8. Cover the plumbing extension sealing surface to prevent contamination.