plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Heater-A/C Housing Removal and Installation|Page 8867 > < Heater-A/C Housing Removal and Installation|Page 8865
Page 4
background image

23. Remove the right and left end covers.
24. Disconnect the wire connectors from the Passenger Airbag Module.
25. Remove the front door sill trim covers. Refer to: "Body and Frame : Interior Trim : Trim Panel : Service and Repair" See: Body and

Frame/Interior Moulding / Trim/Trim Panel/Service and Repair

26. Remove the A-pillar trim covers.  Refer to: "Body and Frame : Interior Trim : Trim Panel : Service and Repair" See: Body and

Frame/Interior Moulding / Trim/Trim Panel/Service and Repair

27. Remove the glove box.
28. Disconnect the antenna lead connector from behind the glove box.
29. Remove the lower steering column cover.
30. Remove the knee blocked panel.

Body Control Module Connectors

31. Disconnect the lower two, forty pin wire harness connectors, from the main Junction Block near left cowl side panel.
32. Disconnect the instrument panel wire harness connector from the bottom of Body Control Module.

40 Way Connectors

33. Disconnect the two forty pin connectors from the right of the steering column.

Heater-A/C Housing Removal and Installation|Page 8867 > < Heater-A/C Housing Removal and Installation|Page 8865