Grand Voyager V6-3.0L VIN 3 (1998)
Antenna: Service and Repair
Antenna Mast and Cable Lead
REMOVAL
1. Remove glove box from instrument panel.
Antenna Cable
2. Disconnect antenna cable connector from extension cable.
3. Remove right kick trim panel.
4. Disengage rubber grommet insulator from door hinge pillar.
5. Pull antenna cable through hinge pillar into open between door hinges.
6. Hoist and support vehicle on safety stands.
7. Remove front wheel.
8. Remove front wheelhouse splash shield.
Antenna Mast
9. Slide the plastic sleeve up on antenna mast for access to mast. Remove antenna mast from antenna base.
