Grand Voyager V6-3.0L VIN 3 (1998)
10. Disconnect power switch from wire connector.
Fig.33 Memory Seat/Mirror Switch
11. If equipped, using a small, flat bladed pry tool, remove memory seat/mirror switch and disconnect wire connector.
12. If equipped, remove screw holding door trim to door panel from behind inside latch release handle.
Fig.34 Front Door Trim Panel
13. Disengage clips attaching door trim to door frame around perimeter of panel.
14. Lift trim panel upward to disengage flange from inner belt molding at top of door.
15. Tilt top of trim panel away from door to gain access to latch linkage.