Grand Voyager V6-3.0L VIN 3 (1998)
Rear Speed Sensor Cable Connection To Vehicle Wiring Harness
3. Remove grommet from floor pan of vehicle and unplug speed sensor cable connector from vehicle wiring harness.
CAUTION: When removing rear wheel speed sensor cable from routing clips on rear brake flex hose, be sure not to damage the routing clips.
Routing clips are molded onto the hose and will require replacement of the brake flex hose if damaged during removal of the speed sensor cable.
Speed Sensor Cable Attachment To Brake Flex Hose
4. Carefully remove the speed sensor cable from the rear brake flex hose routing clips.
Right Rear Speed Sensor Cable Routing
5. If removing the right rear speed sensor cable, remove the speed sensor cable grommet from the axle flange, the brake tube clip and the routing clip
from the track bar bracket on the axle.
