Grand Voyager V6-3.0L VIN 3 (1998)
3. Cut Plastigage to same length as width of the bearing and place it in parallel with the journal axis.
Measure Oil Clearance With Plastigage
CRANKSHAFT SPECIFICATION CHART
CAUTION: Do not rotate crankshaft or the Plastigage will be smeared.
4. Install the main bearing cap carefully and tighten the bolts to specified torque.
Measuring Clearance
5. Carefully remove the bearing cap and measure the width of the Plastigage at the widest part using the scale on the Plastigage package. Refer to
Crankshaft Clearance Specification Chart for proper clearances. Also see Measuring Main and Connecting Rod Bearing Clearance in Standard
Service Procedures.
CRANKSHAFT BEARING INSTALLATION
When the bearings need replacing, select and install the proper bearing by the following procedure.