Grand Voyager V6-3.0L VIN 3 (1998)
Air Conditioning Drive Belt 3.0L Engine
To remove the air conditioning compressor drive belt, first loosen the idler pulley lock nut, then turn the adjusting screw to lower the idler pulley.
AIR CONDITIONING BELT INSTALLATION/ADJUSTMENT
To adjust the air conditioning drive belt, loosen the idler pulley lock nut and adjust belt tension by tightening adjusting screw. Refer to
Proper Belt Tension and Belt Tension Chart. Tighten pulley lock nut to 54 Nm (40 ft. lbs.) after adjustment.
