Grand Voyager V6-3.0L VIN 3 (1998)
Exhaust Manifold: Service and Repair
REMOVAL
1. Raise vehicle and disconnect exhaust pipe from rear (cowl side) exhaust manifold at the flex-joint.
Disconnect Up Stream Heated Oxygen Sensor Connection
2. Disconnect Oxygen Sensor lead wire at the rear exhaust manifold.
Crossover Pipe
3. Remove bolts attaching cross-over pipe to manifold.
Rear Exhaust Manifold Heat Shield
4. Remove rear heat shield.
5. Remove nuts attaching rear manifold to cylinder head and remove manifold.
