Grand Voyager V6-3.0L VIN 3 (1998)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
1. Remove fog lamp from vehicle.
2. Remove rear cover from fog lamp.
Fog Lamp Bulb
3. Disengage wire clip holding bulb in fog lamp.
4. Hinge wire retainer clip out of bulb removal path.
5. Pull bulb from lamp.
6. Disengage wire connector from fog lamp wire harness.
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs with fingers or other oily surfaces, reduced bulb life will result.
1. Engage wire connector into fog lamp wire harness.
2. Insert bulb into lamp so index notches on bulb engage with bosses in lamp.
3. Hinge wire retainer clip over bulb base.
4. Engage wire clip to hold bulb into lamp.
5. Install rear cover on fog lamp.
6. Install fog lamp on vehicle.
