Grand Voyager V6-3.0L VIN 3 (1998)
Drive Belt: Adjustments
Satisfactory performance of the belt driven accessories depends on proper belt tension. Belt tensioning should be performed with the aid of a
Burroughs gauge Special Tool C-4162. Because of space limitations in the engine compartment, the use of the gauge may be restricted. Raise the
vehicle on a hoist and the remove the splash shield to gain access to the drive belts.
Use belt tensioning Special Tool Kit C-4162 for:
CAUTION: The Burroughs gauge for the Poly-V belt is not to be used on the V-belt. These gauges are not interchangeable.
-
For conventional V-belts affix the Burroughs gauge (Special Tool C-4162) to the belt. Adjust the belt tension for New or Used belt as prescribed
in the Belt Tension Chart.
-
For a Poly-V belt affix the Poly-V Burroughs gauge to the belt and then apply specified tension to the belt as prescribed in the Belt Tension Chart.
Belt Tension Chart
Adjust belt tension for a New or Used belt as prescribed in the Belt Tension Chart.
