Grand Voyager V6-3.0L VIN 3 (1998)
12.
In the engine compartment, route the revised throttle cable as illustrated in Figure 1.
13.
Insert the throttle body end of the cable housing into the throttle cable mounting bracket on the engine.
14.
Attach the retaining clip on the throttle cable into the hole in the top of the cable routing bracket installed in step 7.
15.
Rotate the throttle lever to wide open and install the throttle cable end into the throttle body cam.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
14-80-25-91
0.2 Hrs.
FAILURE CODE:
P8-New Part
