Grand Voyager V6-3.0L VIN 3 (1998)
Seals and Gaskets: Service and Repair
3 Speed Automatic
The pump oil seal can be replaced without removing the pump and reaction shaft support assembly from the transaxle case.
REMOVAL
Remove Pump Oil Seal
1. Screw seal remover Tool C-3981-B into seal, then tighten screw portion of tool to withdraw the seal.
INSTALLATION
Install Pump Oil Seal
1. To install a new seal, place seal in opening of the pump housing (lip side facing inward). Using Tool C-4193 and Handle Tool C-4171, drive new
seal into housing until tool bottoms.
