plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

D-Pillar Speaker|Page 5647 > < Instrument Panel Speaker - Intermittent Operation/Static|Page 5644
Page 1
background image

Speaker: Service and Repair
D-Pillar Speaker

REMOVAL

1. Remove D-pillar trim panel as necessary to gain access to door speaker. 
2. Disconnect wire connector from speaker.

D-Pillar Speaker

3. Remove by sliding speaker out of bracket by pushing on magnet. The capacitor is wrapped with foam tape.
4. Remove speaker.

INSTALLATION

For installation reverse the above procedure.

D-Pillar Speaker|Page 5647 > < Instrument Panel Speaker - Intermittent Operation/Static|Page 5644