Grand Voyager V6-3.3L VIN G Flex Fuel (1999)
Power Mirror Motor: Testing and Inspection
1. Remove Power Mirror Switch. Refer to Instrument Panel and Systems, Power Mirror Switch Replacement.
2. Disconnect wiring harness connector to the power mirror switch and headlamp switch.
3. Using two jumper wires:
-
Connect one to a 12-volt source
-
Connect the other to a good body ground
Power Mirror Test
-
Refer to the Mirror Test Chart for wire hookups at the switch connector.
4. If results shown in table are not obtained, check for broken or shorted circuit, or replace mirror assembly as necessary.
