plymouth Workshop Repair Guides

Plymouth Workshop Service and Repair Manuals

Fuel Line Coupler|Service Precautions|Page 3012 > < Electrical Specifications|Page 3008
Page 1
background image

Fuel Line Coupler: Service Precautions

WARNING: 

-

RELEASE FUEL SYSTEM PRESSURE BEFORE DISCONNECTING A QUICK-CONNECT FITTINGS.

-

THE FUEL SYSTEM IS UNDER A CONSTANT PRESSURE (EVEN WITH THE ENGINE OFF). BEFORE SERVICING ANY FUEL
SYSTEM HOSES, FITTINGS OR LINES, THE FUEL SYSTEM PRESSURE MUST BE RELEASED
.

CAUTION:  

-

Never install a quick-connect fitting without the retainer being either on the fuel tube or already in the quick-connect fitting. In either case, ensure
the retainer locks securely into the quick-connect fitting by firmly pulling on fuel tube and fitting to ensure it is secured.

-

The interior components (O-rings, spacers) of this type of quick-connect fitting are not serviced separately, but new plastic retainers are available.
Do not attempt to repair damaged fittings or fuel lines/tubes. If repair is necessary, replace the complete fuel tube assembly.

Fuel Line Coupler|Service Precautions|Page 3012 > < Electrical Specifications|Page 3008