Grand Voyager V6-3.8L VIN L (1999)
Brake Shoe: Service and Repair
Cleaning and Inspection
LINING
1. Remove the tire and wheel assembly from the vehicle.
2. Remove the rear brake adjusting hole cover plug.
3. Insert a thin screwdriver into brake adjusting hole to hold the adjusting lever away from the notches on the adjusting screw star wheel.
4. Insert Tool C-3784 into brake adjusting hole and engage notches of brake adjusting screw star wheel. Release brake by prying down with adjusting
tool.
5. Remove the rear brake drum from the rear hub/bearing assembly.
6. Inspect brake lining for wear, shoe alignment, and or contamination from grease or brake fluid.
