Grand Voyager V6-3.8L VIN L (1999)
Remove/Install CAB
4. Remove the CAB from the HCU.
INSTALLATION
1. Install the CAB on the HCU.
2. Install the 4 bolts mounting the CAB to the HCU. Tighten the CAB mounting bolts to a torque of 2 Nm (17 inch lbs.).
3. Plug the pump/motor wiring harness into the CAB.
4. Install the ICU in the vehicle.
5. Bleed the base and ABS hydraulic systems.
6. Road test the vehicle to ensure proper operation of the base brakes and ABS.
